Nanotechnology/Materials, Applied materials

Nanotechnology/Materials, Inorganic materials

Manufacturing technology (mechanical, electrical/electronic, chemical engineering), Thermal engineering

Nanotechnology/Materials, Composite materials and interfaces

Nanotechnology/Materials, Material fabrication and microstructure control

Nanotechnology/Materials, Structural and functional materials

セラミックス・金属の焼成、焼結技術とプロセス開発
Contributor
29 Feb. 2024
9784867980095

Handbook of Functionally Graded Materials
Contributor
NTS, 15 Feb. 2024

熱電変換システムの高効率化・高信頼性化技術
Joint work
29 Sep. 2006

Influence of Element Substitution on Corrosion Behavior of Bi2Te3-Based Compounds
Hitoshi Kohri; Takayoshi Yagasaki
Journal of Electronic Materials, 01 Jun. 2018, [Reviewed]

Corrosion Behavior of Bi2Te3-Based Thermoelectric Materials Fabricated by Melting Method
Hitoshi Kohri; Takayoshi Yagasaki
JOURNAL OF ELECTRONIC MATERIALS, May 2017, [Reviewed]

Influence of Crystal Growth Cooling Conditions on Thermoelectric Properties of Aurivillius Phase Bi-V-O
Hitoshi Kohri; Mizuki Segawa; Takayoshi Yagasaki
JOURNAL OF ELECTRONIC MATERIALS, Nov. 2016, [Reviewed]

Thermoelectric Properties and Thermal Stability of BiCuSeO
Toshiharu Sato; Hitoshi Kohri; Takayoshi Yagasaki
JOURNAL OF ELECTRONIC MATERIALS, Nov. 2016, [Reviewed]

Effect of Element Substitution at V site on Thermoelectric Properties of Aurivillius Phase Bi2VO5.5
Hitoshi Kohri; Takayoshi Yagasaki
JOURNAL OF ELECTRONIC MATERIALS, Oct. 2016, [Reviewed]

The Crystal Growth of In-Se by Vapor Transport Method
Naoki TAKANO; Hitoshi KOHRI and Takayoshi YAGASAKI
Transactions of the Materials Research Society of Japan, Sep. 2014, [Reviewed]

二ケイ化タングステンの合成と熱電特性
栗嶋拓馬,桑折 仁,矢ケ﨑隆義
Functionally Graded Materials, 30 Jun. 2014, [Reviewed]

サファイア基板上へのIn-Seの合成
高野直樹,桑折 仁,矢ケ﨑隆義
Functionally Graded Materials, 30 Jun. 2014, [Reviewed]

生分解性プラスチックへのイオンビーム照射による炭化層の形成が金属薄膜の接着強度に及ぼす影響
早川和希,矢ケ﨑隆義,桑折 仁
Functionally Graded Materials, 30 Jun. 2014, [Reviewed]

生分解性プラスチックへの微細構造が強度及び加水分解に及ぼす影響
高田真伍,矢ケ﨑隆義,桑折 仁,馬場則男,馬場美鈴
Functionally Graded Materials, 30 Jun. 2014, [Reviewed]

炭化層を形成した生分解性樹脂への金属薄膜付与と同薄膜付与材料の分解挙動について
飯田純史,矢ケ﨑隆義,桑折 仁
Functionally Graded Materials, 30 Jun. 2014, [Reviewed]

Behavior of ejectors at oblique collision for developing a debris shield
Hiroka Hamatani; Hitoshi Kohri; Koji Tanaka; Takayoshi Yagasaki; Ichiro Shiota
Proceedings of the International Astronautical Congress, IAC, 2014

SUPERIORITY OF CFRP TO HOMOGENOUS MATERIALS FOR DEBRIS PROTECTOR
H. Miyoi; H. Kohri; K. Tanaka; I. Shiota; A. Yumoto; M. Kato; S. Sasaki; T. Yagasaki
COMPOSITE MATERIALS FOR STRUCTURAL PERFORMANCE: TOWARDS HIGHER LIMITS, 2011, [Reviewed]

The effect of heat treatment on the compressive mechanical properties of carbon/phenolic resin ablator
Tomohiro Era; Ken Goto; Hiroshi Hatta; Hitoshi Kohri; Takayoshi Yagasaki
7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010, 2010

Study on bonding mechanism of carbon fiber/carbon matrix interface in C/C by fundamental model
Hiroki Kurita; Hiroshi Hatta; Ken Goto; Hitoshi Kohri; Ichiro Shiota
DESIGN, MANUFACTURI NG AND APPLICATIONS OF COMPOSITES, 2008, [Reviewed]

熱のチカラ
01 Apr. 2018, [Reviewed], [Invited]

Friction and Wear Characteristics of MoS2/Cu-Sn Composite Film
Hitoshi Kohri; Takayoshi Yagasaki
Proceedings of 14th International Symposium Functionally Graded Materials | Multiscale & Multifunctional Structures, 18 Sep. 2016

Decomposition and Recovery Technology of Multi-function Type Print Circuit Board with Substrate a Biodegradable Resin
Arashi Ohmukai; Takayoshi Yagasaki; Hitoshi Kohri and Ichiro Takano
Proceedings of 14th International Symposium Functionally Graded Materials | Multiscale & Multifunctional Structures, 18 Sep. 2016

G0900203 Decomposition and recovery technology of multi function type PCB with substrate a biodegradable resin
OHMUKAI Arashi; YAGASAKI Takayoshi; KOHRI Hitoshi
Mechanical Engineering Congress, Japan, 13 Sep. 2015

G0900202 Recovery of suspended metal particles by blowing Micro- and Nano- bubbles into flotation
INOUE Yoshio; MANAKA Yohei; KOHRI Hitoshi; YAGASAKI Takayoshi
Mechanical Engineering Congress, Japan, 13 Sep. 2015

J0530102 Time dependence of thermoelectric ptoperties of BiCuSeO at high temperatures
SATO Toshiharu; KOHRI Hitoshi; YAGASAKI Takayoshi
Mechanical Engineering Congress, Japan, 13 Sep. 2015

斜め衝突を利用したCFRP製耐デブリシールドの開発
23 Feb. 2015

摩擦製膜法によるMg2Siの製膜
31 Mar. 2014, [Reviewed]

アーク溶融法による無置換および元素置換WSi2の熱電特性
31 Mar. 2014, [Reviewed]

Damage characterization of oblique hypervelocity impact experiments
09 Oct. 2013
http://id.ndl.go.jp/bib/025822311

Effect of ion beam irradiation on the surface properties of biodegradable plastics
Kazuki HAYAKAWA; Takayoshi YAGASAKI and Hitoshi KOHRI
Transactions of the Materials Research Society of Japan, 22 Apr. 2013, [Reviewed]

Novel Debris Protector for SSPS by Oblique Collision
Ichiro Shiota; Masahiko Kato; Hitoshi Kohri; Takayoshi Yagasaki; Koji Tanaka; Susumu Sasaki; Atsushi Yumoto
2nd Annual International Conference on Sustainable Energy and Environmental Sciences(SEES2013) PROCEEDINGS, 25 Feb. 2013

Effect of ion beam irradiation on the surface properties of biodegradable plastics
2013

Novel Debris Protector for Artificial Satellite by Oblique Collision
Hitoshi Kohri; Ichiro Shiota; Koji Tanaka; Masahiko Kato; Atshushi Yumoto; Susumu Sasaki; Takayoshi Yaga
GSTF Journal of Engineering Technology, 2013

Influence of strength and degradation by changes in the microstructure of biodegradable plastics
Shingo TAKADA; Takayoshi YAGASAKI; Hitoshi KOHRI; Yosuke NISHITANI; Norio BABA; Misuzu BABA
2013

Thermal Evaluation of Carbonized Refuse-Derived Fuel Manufacture Process
2013

Influence of a metal thin film adhesion for formation carbonization layer by ion beam irradiation with variety ions
2013

The Synthesis of In-Se by Vapor Transport Method
Naoki Takano; Hitoshi Kohri; Takayoshi Yagasaki
ADAPTIVE, ACTIVE AND MULTIFUNCTIONAL SMART MATERIALS SYSTEMS, 2013

Thermoelectric Generating Properties of Aurivillius Compounds
Hitoshi Kohri; Takayoshi Yagasaki
ADAPTIVE, ACTIVE AND MULTIFUNCTIONAL SMART MATERIALS SYSTEMS, 2013

Novel Debris Protector for SSPS by Oblique Collision
Ichiro Shiota; Masahiko Kato; Hitoshi Kohri; Takayoshi Yagasaki; Koji Tanaka; Susumu Sasaki; Atsushi Yumoto
2nd Annual International Conference on Sustainable Energy and Environmental Sciences(SEES2013) PROCEEDINGS, 2013

Novel Debris Protector for Artificial Satellite by Oblique Collision
Hitoshi Kohri; Ichiro Shiota; Koji Tanaka; Masahiko Kato; Atshushi Yumoto; Susumu Sasaki; Takayoshi Yagasaki
GSTF International Journal of Engineering Technology (JET), 2013

Fabrication and Characterization of Carbonized RDF Containing Plastic Waste
Tomoaki Sato; Yuki Ito; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Influence of the Surface Property of a Biodegradable Plastic by Ion Beam Irradiation
Kazuki Hayakawa; Masafumi Iida; Ichiro Takano; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Hydrolytic Behavior and Microstructural Control of Biodegradable Plastic
Shingo Takada; Shugo Ohgane; Misuzu Baba; Norio Baba; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Improving the Physical Properties of Biodegradable Plastic
Shugo Ohgane; Shingo Takada; Norio Baba; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Degradation Behavior of a Biodegradable Resin That Formed the Carbonization Layer on the Surface
Masafumi Iida; Kazuki Hayakawa; Ichiro Takano; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Synthesis and Thermoelectric Properties of Tungsten Silicide
Takuma Kurishima; Takayoshi Yagasaki; Hitoshi Kohri
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

Initial Crystal Growth Stage of In-Se by Vapor Transport Method
Naoki Takano; Takayoshi Yagasaki; Hitoshi Kohri
The 11th International Symposium on Advanced Technology (ISAT-Special) Proceedings, 30 Oct. 2012

デブリ防護における斜め衝突の優位性
27 Feb. 2012

The Crystal Growth of In-Se for Thermophotovoltaic Generator
Naoki Takano; Hitoshi Kohri; Takayoshi Yagasaki.
31st ISAS SPACE ENERGY SYMPOSIUM, 24 Feb. 2012

Advantage of oblique collision for debris protector
Ichiro Shiota; Hitoshi Kohri; Atsushi Yumoto; Masahiko Kato; Koji Tanaka; Susumu Sasaki
Nanomaterials and Energy, 2012
http://www.icevirtuallibrary.com/doi/pdf/10.1680/nme.11.00015

熱光起電力発電を想定したIn-Se の合成
2012

Fabrication and Characterization of Carbonized RDF Containing Plastic Waste
2012

Influence of the Surface Property of a Biodegradable Plastic by Ion Beam Irradiation
2012

Hydrolytic Behavior and Microstructural Control of Biodegradable Plastic
2012

Improving the Physical Properties of Biodegradable Plastic
2012

Degradation Behavior of a Biodegradable Resin That Formed the Carbonization Layer on the Surface
2012

Synthesis and Thermoelectric Properties of Tungsten Silicide
2012

Initial Crystal Growth Stage of In-Se by Vapor Transport Method
2012

Advantage of oblique collision for debris protector
Ichiro Shiota; Hitoshi Kohri; Atsushi Yumoto; Masahiko Kato; Koji Tanaka; Susumu Sasaki
Nanomaterials and Energy, 2012
http://www.icevirtuallibrary.com/doi/pdf/10.1680/nme.11.00015

Heat durability of carbon fiber reinforced nickel composites
Ichiro Shiota; Hitoshi Kohri
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, Dec. 2011

Fabrication and Evaluation of Carbon Nano tube Dispersed Light Metal Matrix Composites
Yuji SHIOTA; Hitoshi KOHRI; Ichiro SHIOTA and Takayoshi YAGASAKI
15 Apr. 2011

ポリイミド/炭素繊維複合材料からなる新規超軽量アブレータの開発
2011

カーボンナノチュブ分散軽金属基複合材料の作製および評価
2011

CFRP Panel for Protection from Space Debris by Oblique Collision
SHIOTA Ichiro; KOHRI Hitoshi; YUMOTO Atsushi; KATO Masahiko; TANAKA Kohji; SASAKI Susumu
Materials science and technology, 2011

斜め衝突効果を応用したCFRPデブリシールドの研究
2011

CFRP Panel for Protection from Space Debris by Oblique Collision
Ichiro SHIOTA; Hitoshi KOHRI; Atsushi YUMOTO; Masahiko KATO; Kohji TANAKA; Susumu SASAKI
Materials Science and Technology of Japan, 2011

Thermoelectric Generating Properties of Perovskite Like Materials
H. KOHRI; M. KATO; I. J. OHSUGI and I. SHIOTA
Advances in Science and Technology, 27 Oct. 2010, [Reviewed]

アトマイズ処理粉末を出発原料とする多孔質焼結体の作製とその特性評価
05 Mar. 2010

炭素繊維/ポリイミドを用いた超軽量次世代アブレータの開発
2010

Effect of Copper and Aluminum Addition to the Thermoelectric Properties of Sintered p-type FeSi2 in Air
Naohiro NIIZEKI; Masahiko KATO; Isao J. OHSUGI; Yukihiro ISODA; Hitoshi KOHRI; Ichiro SHIOTA
Bulletin of Salesian Polytechnic, 2010

Thermoelectric Generating Properties of Perovskite Like Materials
2010

A trial of FGM bearings with solid lubricant
T. Hashimoto; H. Kohri; A. Yumoto; I. Shiota
MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS, 2010

Ca3Co2O6 for high temperature side of thermoelectric FGM
Takeo Uesugi; Hitoshi Kohri; Ichiro Shiota; Masahiko Kato; Isao J. Ohsugi
MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS, 2010

Effect of Aluminum and Copper Addition to the Thermoelectric Properties of FeSi2 Sintered in the Atmosphere
Naohiro Niizeki; Masahiko Kato; Isao J. Ohsugi; Yukihiro Isoda; Hitoshi Kohri; Ichiro Shiota
MATERIALS TRANSACTIONS, Jul. 2009

Fiber-matrix Interface Mechanical Properties of Carbon-Carbon Composites
GOTO Ken; ISHII Miho; HATTA Hiroshi; KOHRI Hitoshi; SHIOTA Ichiro
TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, AEROSPACE TECHNOLOGY JAPAN, 2009

Fiber-matrix Interface Mechanical Properties of Carbon-Carbon Composites
Ken GOTO; Miho ISHII; Hiroshi HATTA; Hitoshi KOHRI; Ichiro SHIOTA
Transactions of the Japan Society for Aeronautical and Space Sciences, 2009

Thermoelectric Properties of High Density Sintered Ca3Co2O6
T. Uesugi; H. Kohri; I. Shiota; M. Kato and I. J. Ohsugi
Advances in Science and Technology, 02 Sep. 2008, [Reviewed]

Bi2Te3-GeTe for high temperature side of Bi2Te3 base FGM
Junichi NINOMIYA; Hitoshi KOHRI and Ichiro SHIOTA
31 Jul. 2008, [Reviewed]

Effect of Nickel and Copper Addition to the Thermoelectric Properties of CoSi
Toshihiro TSURUGAI; Masahiko KATO; Isao J. OHSUGI; Yukihiro ISODA; Hitoshi KOHRI and Ichiro SHIOTA
31 Jul. 2008, [Reviewed]

モデル材料を用いたC/Cにおける繊維/マトリクス界面強度変化に関する基礎的研究
2008

Bi2Te3系FGM用高温側材料を目的としたBi2Te3-GeTe系に関する基礎的研究
2008

CoSiの熱電特性に及ぼすNi,Cuの添加効果
2008

Thermoelectric Properties of High Density Sintered Ca3Co2O6
2008

New fabrication process of nano-composites by biomimetic approach
M. Okamoto; E. Iwai; H. Hatta; H. Kohri; I. Shiota
CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Mining Smartness from Nature, 2008

Friction coefficients and wear rates of MoS2/Cu, BN/Cu composites
Takashi Hashimoto; Hitoshi Kohri; Atsushi Yumoto; Ichiro Shiota
CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Smart Materials and Micro/Nanosystems, 2008

Fabrication of electrode for thermoelectric oxide materials
Hitoshi Kohri; Ichiro Shiota; Masahiko Kato; Isao J. Ohsugi
CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Smart Materials and Micro/Nanosystems, 2008

Friction Coefficients and Wear Rates of MoS2/Cu, BN/Cu Composites
Takashi Hashimoto; Hitoshi Kohri; Atsushi Yumoto; Ichiro Shiota
Advances in Science and Technology, 2008

New fabrication process of nano-composites by biomimetic approach
M. Okamoto; E. Iwai; H. Hatta; H. Kohri; I. Shiota
CIMTEC 2008 - Proceedings of the 3rd International Conference on Smart Materials, Structures and Systems - Mining Smartness from Nature, 2008

Tribology of Babbitt Metal with Solid Lubricants
Ichiro Shiota; Atsushi Yumoto; Hitoshi Kohri; Naotake Niwa
Proceedings of The AUSTRIB 06, Dec. 2006, [Reviewed]

Synthesis and thermoelectric properties of,Bi2Te3-GeTe pseudo binary system
Hitoshi Kohri; Ichiro Shiota; Masahiko Kato; Isao J. Ohsugi and Takashi Goto
Advances in Science and Technology, 10 Oct. 2006, [Reviewed]

Effect of Cu on the decomposition reaction of Fe2Si5
N. Niizeki, M. Kato, I. J. Ohsugi, Y. Isoda, H. Kohri and I. Shiota
2006

Synthesis and thermoelectric properties of Bi2Te3-GeTe pseudo binary system
2006

Tribology of Babbitt Metal with Solid Lubricants
2006

Fine Bi2Te3 wires fabricated by glass sealed melt spinning
I. Shiota; H. Kohri; M. Kato; I. J. Ohsug
ICT'06: XXV INTERNATIONAL CONFERENCE ON THERMOELECTRICS, PROCEEDINGS, 2006

Effect. of copper family elements on phase transformation of iron silicides
K. Kayamura; Y. Nakajima; M. Kato; I. J. Ohsugi; T. Kojima; Y. Isoda; H. Kohri; I. Shiota; T. Suzuki
Transactions of the Materials Research Society of Japan, Vol 31, No 4, 2006

Fine Bi2Te3 wires fabricated by glass sealed melt spinning
I. Shiota; H. Kohri; M. Kato; I. J. Ohsugi
International Conference on Thermoelectrics, ICT, Proceedings, 2006

Bi2Te3－GeTe系の熱電特性
22 Aug. 2005

ガラス被覆溶融紡糸法によるBi2Te3系化合物の微細加工
22 Aug. 2005

Solid State Synthesis of Ti-Al Composites with Metal Fiber
2005

Development of thermoelectric cooling devices with graded structure
H Kohri; Shiota, I
FUNCTIONALLY GRADED MATERIALS VIII, 2005

Solid State Synthesis of Ti-Al Composites with Metal Fiber
I. Shiota; H. Kohri; M. Kato
International Journal of Self-Propagating High-Temperature Synthesis, 2005, [Reviewed]

Thermoelectric Properties of MnSi~1.73 Produced by Cold Pressing and Sintering
T. Iizuka*; M. Kato*; I. J. Ohsugi*; T. Kojima*; I. A. Nishida; H. Kohri; I. Shiota; T. Suzuki
Transactions of the Materials Reserch Society of Japan, Sep. 2004, [Reviewed]

熱電材料の微細加工に関する研究
19 Aug. 2004

Properties of SiC/SiC Composites with Surface Modified SiC Fiber
H. Kohri; I. Shiota; T. Yagasaki; Y. Kimura; T. Watanabe; M. Kato*
Transactions of the Materials Reserch Society of Japan, Aug. 2004, [Reviewed]

Fabrication and Properties of SiCpc Fiber Reinforced Nickel
T. Kuwahara; H. Kohri; T. Yagasaki; Y. Kimura; I. Shiota; M. Kato*
Transactions of the Materials Reserch Society of Japan, Aug. 2004, [Reviewed]

Fabrication and Properties of SiCpc Fiber Reinforced Nickel
2004

Properties of SiC/SiC Composites with Surface Modified SiC Fiber
2004

Thermoelectric Properties of MnSi~1.73 Produced by Cold Pressing and Sintering
2004

Solid State Synthesis of Ti-Al Composites by Foil Metallurgy
2004

Interfacial Reaction in SiCpc Fiber Reinforced Nickel Composite
2004

W-Fiber Reinforced Ti-Al Composites Produced by Foil Metallurgy
2004

W-Fiber Reinforced Ti-Al Composites Produced by Foil Metallurgy
H. Kohri; M. Kato*; I. Shiota
Proceedings of The Third International Conference on Light Materials for Transportation Systems, 2004

Solid State Synthesis of Ti-Al Composites by Foil Metallurgy
I. Shiota; H. Kohri; M. Kato*
International Journal of Self-Propagating High-Temperature Synthesis, 2004, [Reviewed]

Interfacial Reaction in SiCpc Fiber Reinforced Nickel Composite
T. Kuwahara; H. Kohri; M. Kato*; T. Yagasaki; Y. Kimura; T. Kimura**; I. Shiota
Proceedings of The Third International Conference on Light Materials for Transportation Systems, 2004

傾斜機能材料－宇宙材料から工具まで－（最終回）
01 May 2003

GeによるPb-Te系化合物の使用温度領域制御
31 Mar. 2003, [Reviewed]

FGM化によるBi-Te系化合物の冷却特性の向上
31 Mar. 2003, [Reviewed]

傾斜機能材料－宇宙材料から工具まで－（その３）
01 Mar. 2003

傾斜機能材料－宇宙材料から工具まで－（その２）
01 Jan. 2003

Formation on Ti-Al Intermetallic Compounds at Low Temperature by Foil Metallurgy
2003

Surface Modification of SiC by Hydro-thermal Treatment
2003

Ge Effect on Thermoelectric Properties for Pb-Te
2003

Effect of FGMs on thermoelectric cooling properties of bismuth telluride
A Iwama; H Kohri; Shiota, I
FUNCTIONALLY GRADED MATERIALS VII, 2003

Improvement of thermoelectric properties for n-type PbTe by adding Ge
H Kohri; IA Nishida; Shiota, I
FUNCTIONALLY GRADED MATERIALS VII, 2003

Ge Effect on Thermoelectric Properties for Pb-Te
H. Kohri; K. Tanaka; I. Shiota
Advances in Science and Technology, CIMTEC2002-3rd Forum on New Materials-Part II "Mass and Charge Transport in Inorganic Materials-II" Edited by P. Vincenzini and V. Buscaglia, TECHNA srl, 2003, [Reviewed]

Formation on Ti-Al Intermetallic Compounds at Low Temperature by Foil Metallurgy
H. Tetsuka; M. Kato*; H. Kohri; I. Shiota
Advances in Science and Technology, CIMTEC2002-3rd Forum on New Materials-Part II "Mass and Charge Transport in Inorganic Materials-II" Edited by P. Vincenzini and V. Buscaglia, TECHNA srl, 2003, [Reviewed]

Surface Modification of SiC by Hydro-thermal Treatment
T. Watanabe; H. Kohri; T. Yagasaki; Y. Kimura; I. Shiota
Advances in Science and Technology, CIMTEC2002-10th International Ceramics Congress-Part C Edited by P. Vincenzini, TECHNA srl, 2003, [Reviewed]

傾斜機能材料－宇宙材料から工具まで－
01 Nov. 2002

チタンの使い心地 Apple社ノート型パソコンPower Book G4
28 Oct. 2002

FGM被覆のためのTi-Al系金属間化合物の組成制御
29 Nov. 2001, [Reviewed]

Ni-Al系合金表面への組成傾斜アルミナイド被覆
29 Nov. 2001, [Reviewed]

Bi-Te-Se系化合物のSe組成およびキャリア濃度FGM化
29 Nov. 2001, [Reviewed]

Control of grain size and crystal orientation for Bi-Sb-Te compounds
H Kohri; Dauphin, X; K Hasezaki; IA Nishida; Shiota, I
TWENTIETH INTERNATIONAL CONFERENCE ON THERMOELECTRICS, PROCEEDINGS, 2001

Thermal stability of thermoelectric properties for nondoped PbTe
K Tanaka; H Kohri; Shiota, I; IA Nishida
TWENTIETH INTERNATIONAL CONFERENCE ON THERMOELECTRICS, PROCEEDINGS, 2001

Preparation of P-Type Segmented Thermoelectric Materials
' Hitoshi Kohri; Masahiko Kato; Ichiro Shiota; Isao A. Nishida; Toshiyuki Suzuki'
Proceedings of 19th International Conference on Thermoelectrics Edited by D. M. Rowe, BABROW Press, Dec. 2000, [Reviewed]

Properties of joints of Electrodes
I. Shiota; H. Kohri; M. Kato and I. A. Nishida
Proceedings of 19th International Conference on Thermoelectrics Edited by D. M. Rowe, BABROW Press, Dec. 2000, [Reviewed]

工学院大学 環境化学工学科 機能材料物性研究室
02 Nov. 2000

Thermal Stability of Nickel Deposited Pitch-Based Carbon Fiber
TAKAHASHI Yuuki; KATO Masahiko; KOHRI Hitoshi; SHIOTA Ichiro
2000

Microstructure of Ti-Al Intermetallic compounds formed by foil metallurgy
KATO Masahiko; KOHRI Hitoshi; SHIOTA Ichiro
2000

Preparation of P-Type Segmented Thermoelectric Materials
2000

Properties of joints of Electrodes
2000

Joining Characteristics of P-type Segmented Thermoelectric Materials
2000

Formation of Ti-Al Intermetallic Compounds by Foil Metallurgy
2000

Interfacial Phenomena between Ni and Pitch Based Carbon Fibre
2000

Joining Characteristics of P-type Segmented Thermoelectric Materials
H. Kohri; M. Kato; I. Shiota and T. Suzuki
Advances in Science and Technology, Mass and Charge Transport in Inorganic Materials – Fundamentals to Devices，Ed. by P. Vincenzini and V. Buscaglia, TECHNA srl, 2000, [Reviewed]

Interfacial Phenomena between Ni and Pitch Based Carbon Fibre
Ichiro Shiota; Masahiko Kato; Hitoshi Kohri
Advances in Science and Technology, Mass and Charge Transport in Inorganic Materials – Fundamentals to Devices，Ed. by P. Vincenzini and V. Buscaglia, TECHNA srl, 2000, [Reviewed]

Formation of Ti-Al Intermetallic Compounds by Foil Metallurgy
Masahiko Kato,Hitoshi Kohri, Ichiro Shiota; Toshiyuki Suzuki; Takashi Kimura; Chitoshi Masuda
Advances in Science and Technology, Mass and Charge Transport in Inorganic Materials – Fundamentals to Devices，Ed. by P. Vincenzini and V. Buscaglia, TECHNA srl,, 2000, [Reviewed]

Preparation and Mechanical Properties of Pitch Based Carbon Filaments Reinforced Nickel
KATO Masahiko; KOHRI Hitoshi; SHIOTA Ichiro
Jan. 1999

Preparation and Structure of Ceramic Particle Dispersed Ni by Electro-deposition
IWABUCHI Kanzo; KATO Masahiko; KOHRI Hitoshi; SHIOTA Ichiro
Jan. 1999

Te過剰Sb2Te3化合物の合成および熱電特性
1998

Effect of microstructure and composition on thermoelectric properties of Te-rich Sb2Te3
H Kohri; L Chen; IA Nishida; T Hirai
XVII INTERNATIONAL CONFERENCE ON THERMOELECTRICS, PROCEEDINGS ICT 98, 1998

Effect of Dopants on Thermoelectric Properties and Anisotropies for Unidirectionally Solidified n-Bi2Te3
' N. Abe; H. Kohri; I. Shiota; I. A. Nishida'
Functionally Graded Materials 1996 Edited by I. Shiota and Y. Miyamoto, Oct. 1996, [Reviewed]

中温領域熱電材料の高性能化とキャリア濃度FGM
Aug. 1996, [Reviewed]

傾斜構造を有するBi2Te3系焼結体の熱電特性
Aug. 1996, [Reviewed]

n型Bi2Te3焼結体の熱電特性に及ぼすドーパントの影響
Aug. 1996, [Reviewed]

Effect of Dopants on Thermoelectric Properties and Anisotropies for Unidirectionally Solidified n-Bi2Te3
1996

n型 Bi2Te3-Bi2Se3系焼結体の熱電冷却特性
Mar. 1995, [Reviewed]

Functionally Graded Materials in Thermoelectric Conversion System
Hitoshi KOHRI
22 May 2024, [Invited]

Thermoelectric properties of Bi-V-O grown by Bridgman method
Sumika FUJIMOTO; Hitoshi KOHRI
20th Academic Conference of the Thermoelectrics Society of Japan, 26 Sep. 2023

Thermoelectric Properties of MoSi2-WSi2 Pseudobinary Compounds
Kenta MIZUKOSHI; Hitoshi KOHRI
20th Academic Conference of the Thermoelectrics Society of Japan, 26 Sep. 2023

Thermoelectric properties of Fe-based Heusler alloys by SPS methods
Yuto TAKEZAWA; Hitoshi KOHRI
20th Academic Conference of the Thermoelectrics Society of Japan, 26 Sep. 2023

Development of Fe-Si Refractory Thermoelectric Materials
Marisa HARA; Ryosuke IWAI; Hitoshi KOHRI
20th Academic Conference of the Thermoelectrics Society of Japan, 26 Sep. 2023

Effect of Element Substitution on Thermoelectric Properties and Oxidation Resistance of Iron Disilicide
Hitoshi KOHRI
19th EUROPEAN CONFERENCE ON THERMOELECTRICS, 19 Sep. 2023, European Thermoelectric Society

Attempt to Reduce Resistivity of Na-Bi-Ti-O by Ca and Fe Substitution
Jundai NAGATA; Hitoshi KOHRI
The 32nd Functionally Graded Materials symposium, 15 Sep. 2023, Functionally Graded Materials FORUM of JAPAN

Potential of Unused Heat as a Heat Source for Distributed Independent Power
Hitoshi KOHRI; Youhiko MITO; Yukihiro ISODA
The 32nd Functionally Graded Materials symposium, 15 Sep. 2023, Functionally Graded Materials FORUM of JAPAN

Application of Anodized Aluminum Substrate to Flexible Insulating Substrates
Hayato CHIBA; Hitoshi KOHRI
The 32nd Functionally Graded Materials symposium, 14 Sep. 2023, Functionally Graded Materials FORUM of JAPAN

Thermal Properties of Carbon Fiber/Al Substrate
Kaito IWATA; Hitoshi KOHRI
16 Mar. 2023, The Japan Society of Mechanical Engineers

Correlation between Al Anodized Film thickness and Flexibility
Hayato IZUMOYA; Hitoshi KOHRI
16 Mar. 2023, The Japan Society of Machanical Engineers

中温用熱電材料へのろう接条件の検討
12 Nov. 2022

Fe 系ホイスラー合金の熱安定性
12 Nov. 2022

耐火性熱電材料の評価方法の検討
12 Nov. 2022

Fe-Al-Si 系熱電材料の腐食挙動
12 Nov. 2022

Attempt to Improvement for Thermal Diffusivity of Anodized Aluminum
Kaito IWATA; Hayato IZUMOYA; Hitoshi KOHRI
28 Oct. 2022, Functionally Graded Materials Forum of Japan

Attempt to Improve Thermoelectric Properties of Bi-V-O
Hitoshi KOHRI
28 Oct. 2022, Functionally Graded Materials Forum of Japan

Application of Na-Bi-Ti-O to thermoelectric generation
Takashi TSUCHIYA; Masaki KUDO; Hitoshi KOHRI
27 Oct. 2022, Functionally Graded Materials Forum of Japan

環境発電を利用した防災・減災センサーの実現可能性に関する検討
27 Nov. 2019

Crystal Growth of Aurivillius phase Bi-V-O
H. Kohri; M. Kato
European Conference on Thermoelectrics 2019, 23 Sep. 2019, European Thermoelectric Society

温度勾配凝固法によるBi-V-Oの作製
03 Sep. 2019

Time Dependence of Electric potential in Electrical Resistivity Measurement by DC four-terminals Method
Hitoshi KOHRI
International Conference on Thermoelectrics 2019, 02 Jul. 2019, International Thermoelectric Society

Bi層状酸化物の単結晶育成の試み
08 Dec. 2018

ペルチェ効果を利用した高温熱電性能指数の評価
08 Dec. 2018

ハーフホイスラー系合金(ZrNiSn)の作製プロセスの検討
08 Dec. 2018

陽極酸化させたAl 基板の熱電モジュールへの適用
08 Dec. 2018

無電解めっきプロセスを経由したハーフホイスラー合金の合成
08 Dec. 2018

直流四端子法による電気抵抗率測定における電圧時間変化の詳細解析
14 Sep. 2018

MgO基板にろう接したFeSi2の熱安定性
14 Sep. 2018

Attempt to Increase the Toughness of Biodegradable Resin
Hitoshi KOHRI; Yuta WATANABE; Hiroyuki TSUKUMO; Yasumi YUMA
15th International Symposium on Functionally Graded Materials, 07 Aug. 2018, Functionally Graded Materials Forum, [Invited]

Synthesis of Tungsten Disilicide and its Potential as a Thermoelectric Material
Hitoshi KOHRI; Takuma KURISHIMA and Masahiko KATO
37th Annual International Conference on Thermoelectrics (ICT2018) and 16th Annual European Conference on Thermoelectrics (ECT2018), 04 Jul. 2018

CoSb3へのTe添加による電気化学的腐食特性の差異
09 Mar. 2018

(Ti, Zr) Ni1.1Sn 合金における微細構造と熱電特性の関係
09 Dec. 2017

Electrochemical corrosion behavior of skutterudite-type material for thermoelectric devices
Kanae Endo; Hitoshi Kohri; Shiro Seki
2017 Japan-Taiwan Workshop for Joints of Students and Scholars on Materials and Mechanical Engineering, 30 Nov. 2017

Effect of Functionally Graded Structure on Thermoelectrics
Hitoshi KOHRI
10 Nov. 2017, [Invited]

Relationship between microstructure and thermoelectric properties of (Ti,,Zr)NiSn alloy
Koji Hiraoka; Hitoshi Kohri; Shiro Seki
The 16th International Symposium on Advanced Technology (ISAT-16), 02 Nov. 2017

Bi2Te3 系化合物の腐食挙動に,対する元素置換の影響
11 Sep. 2017

MoS2/Cu-Sn耐摩耗コーティングの厚膜化
07 Aug. 2017

Influence of Element Substitution on Corrosion Behavior of Bi2Te3-Based Compounds
Hitoshi Kohri; Takayoshi Yagasaki
36th Annual International Conference on Thermoelectrics (ICT2017), 30 Jul. 2017

超・亜臨界流体剥離法によるグラフェンの作製
16 Mar. 2017

各種廃液からの有価金属の分離・回収を想定したマイクロ・ナノバブル導入型浮選技術の開発
16 Mar. 2017

PCB への適用を想定した生分解性ポリマーアロイ基板表面での導電性薄膜形成と薄膜機能の評価
16 Mar. 2017

超・亜臨界分解装置構成部材料における腐食挙動の評価
16 Mar. 2017

Bi2Te3系熱電変換材料の腐食挙動
16 Mar. 2017

天然繊維強化生分解性プラスチック基複合材料の作製
16 Mar. 2017

終末処理を想定した電気・電子用生分解性樹脂基板の分解挙動に関する研究
16 Mar. 2017

生分解性プラスチックスの各種微細構造調整が同材の終末処理に及ぼす影響
07 Mar. 2017

生分解性ステレオコンプレックス材料の分解挙動
04 Mar. 2017

生分解性ポリマーアロイ材の微細構造が機械的特性に及ぼす影響
04 Mar. 2017

微細構造調整を施した生分解性樹脂を基板とする多機能型PCB（Print Circuit Board）の分解挙動に関する研究
03 Dec. 2016

超・亜臨界エタノールによるグラフェンの作製
03 Dec. 2016

TiNiSn系熱電材料の作製および熱電特性
03 Dec. 2016

熱電発電モジュールの放熱部を想定した絶縁基板上への電極形成
03 Dec. 2016

自動車廃熱発電を想定した銅－アルミナ高熱伝導接合体の作製
03 Dec. 2016

直流法による電気抵抗率の自動計測システムの開発
03 Dec. 2016

天然繊維強化生分解性プラスチック基複合材料の作製
03 Dec. 2016

宇宙空間における使用を想定したCFRPの劣化機構
03 Dec. 2016

生分解性樹脂を基板とする多機能型PCBの分解・回収技術に関する研究
25 Nov. 2016

MoS2/Cu-Sn耐摩耗コーティングの作製
25 Nov. 2016

生分解性樹脂を基板とした多機能型PCBの分解及び回収
01 Nov. 2016

Friction and Wear Characteristics of MoS2/Cu-Sn Composite Film
H. Kohri; T. Yagasaki
14th International Symposium Functionally Graded Materials | Multiscale & Multifunctional Structures (ISFGMs2016), 21 Sep. 2016

Decomposition and Recovery Technology of Multi-function Type Print Circuit Board with Substrate a Biodegradable resin
Arashi OMUKAI; Takayoshi YAGASAKI; Hitoshi KOHRI; Ichiro TAKANO
14th International Symposium Functionally Graded Materials | Multiscale & Multifunctional Structures (ISFGMs2016), 21 Sep. 2016

Influence of heating in the air on thermoelectric properties of BiCuSeO
T.Sato,H.Kohri,T.Yagasaki
The 14th International Symposium on Advanced Technology, 02 Nov. 2015

大気雰囲気下における加熱が BiCuSeO の熱電特性におよぼす影響
佐藤利春,桑折 仁,矢ケ﨑隆義
The 2nd Innovation Forum of Advanced Engineering and Education (IFAEE), 02 Nov. 2015

Decomposition and recovery technology of multi function type PCB with substrate a biodegradable resin
Arashi OOMUKAI; Takayoshi YAGASAKI; Hitoshi KOHRI; Ichiro TAKANO
The 14th International Symposium on Advanced Technology, 02 Nov. 2015

Recovery of suspended metal particles by blowing Micro- and Nano-bubbles into flotation
Yoshio INOUE; Takayoshi YAGASAKI; Hitoshi KOHRI and; Minori KAMAYA
The 14th International Symposium on Advanced Technology, 02 Nov. 2015

An Attempt to Improve Thermoelectric Properties of Aurivillius Phase Bi-V-O
M. Segawa; ○T. Sato; H. Kohri and T. Yagasaki
The 14th International Symposium on Advanced Technology, 02 Nov. 2015

高温下におけるBiCuSeOの熱電特性の時間依存性
16 Sep. 2015

Decomposition and recovery technology of multi function type PCB with substrate a biodegradable resin
15 Sep. 2015

マイクロ及びナノバブルを用いた浮上分離法による懸濁金属微粒子の回収
15 Sep. 2015

BiCuSeO 系材料の熱電特性
07 Sep. 2015

Aurivillius 相 Bi-V-O の電気抵抗率低減の試み
07 Sep. 2015

BiCuSeOの熱電特性におよぼす熱劣化の影響
01 Sep. 2015

Decomposition and recovery technology of multi function type PCB with substrate a biodegradable resin
01 Sep. 2015

マイクロ及びナノバブルを用いた浮上分離法による懸濁金属微粒子の回収～金属微粒子の浮上分離に微量界面活性剤が及ぼす影響～
31 Aug. 2015

Aurivillius相Bi-V-Oの結晶成長時における冷却条件の影響
31 Aug. 2015

Effect of Element Substitution at V site on Thermoelectric Properties of Aurivillius Phase Bi2VO5.5
Hitoshi Kohri and Takayoshi Yagasaki
34th Annual International Conference on Thermoelectrics(ICT2015) and 13th European Conference on Thermoelectrics(ECT2015), 29 Jun. 2015

Thermoelectric properties and thermal stability of BiCuSeO
Toshiharu Sato; Hitoshi Kohri and Takayoshi Yagasaki
34th Annual International Conference on Thermoelectrics(ICT2015) and 13th European Conference on Thermoelectrics(ECT2015), 29 Jun. 2015

Influence of Cooling Conditions of Crystal Growth on Thermoelectric Properties of Aurivillius Phase Bi-V-O
Mizuki Segawa; Hitoshi Kohri and Takayoshi Yagasaki
34th Annual International Conference on Thermoelectrics(ICT2015) and 13th European Conference on Thermoelectrics(ECT2015), 29 Jun. 2015

斜め衝突を利用したCFRP製耐デブリシールドの開発
23 Feb. 2015

斜め衝突を用いた軽量デブリシールドの研究
06 Jan. 2015

Aurivillius相Bi-V-Oの熱電特性に対する溶製条件の影響
06 Dec. 2014

Final treatment technology of multi function type PCB with substrate a biodegradable resin
06 Dec. 2014

Fabrication and Thermoelectric Properties of BiCuSeO
T. SATO; H. KOHRI and T. YAGASAKI
The 1st Innovation Forum of Advanced Engineering and Education - New Frontiers in Advanced Engineering -, 02 Nov. 2014

Behavior of Ejectors at Oblique Collision for Developing a Debris Shield
Hiroka HAMATANI; Hitoshi KOHRI; Koji TANAKA; Takayoshi YAGASAKI
65th International Astronautical Congress, 01 Oct. 2014, The International Astronautical Federation

BiCuSeOの熱的安定性
30 Sep. 2014

Decomposition and recovery technology of multi function type PCB with substrate a biodegradable resin
Arashi OOMUKAI; Takayoshi YAGASAKI; Hitoshi KOHRI
Student exchange meeting of FY2014, 30 Aug. 2014, The Society of Materials Science, Japan, Kanto Branch

Durability Test of Carbon Fiber Reinforced Plastics on Space Environments for Development of the Lightweight Debris Shield
H. HAMATANI; H. KOHRI; K. TANAKA and T. YAGASAKI
International Union of Materials Research Societies - The IUMRS International Conference in Asia 2014 (IUMRS-ICA2014), 28 Aug. 2014, International Union of Materials Research Societies

Preparation of Mg2Si Film by Friction Film Forming Method
M. TAKAHASHI; H. KOHRI and T. YAGASAKI
6th Forum on New Materials (CIMTEC 2014), 19 Jun. 2014, TECHNA GROUP

Fabrication and Thermoelectric Properties of Te Substituted BiCuSeO
T. SATO; H. KOHRI and T. YAGASAKI
6th Forum on New Materials (CIMTEC 2014), 19 Jun. 2014, TECHNA GROUP

Fine Bi Wires Prepared by the Glass Coated Melt Spinning Method
H. KOHRI and T. YAGASAKI
6th Forum on New Materials (CIMTEC 2014), 18 Jun. 2014, TECHNA GROUP

Te置換BiCuSeOの合成および熱電特性
18 May 2014

マイクロ及びナノバブルを用いた懸濁金属微粒子浮上分離に関する研究
18 May 2014

ナノ及びマイクロバブルを用いた懸濁金属微粒子浮上分離に関する研究
07 Dec. 2013

BiCuSeOの熱電特性におよぼすTe置換の影響
07 Dec. 2013

CNT/Al複合材料の作製および熱的安定性
07 Dec. 2013

アーク溶融法による無置換および元素置換WSi2の熱電特性
31 Oct. 2013

生分解性樹脂複合材の機能化処理による微細組織制御が機械的特性及び分解挙動に及ぼす影響
31 Oct. 2013

摩擦製膜法によるMg2Siの製膜
31 Oct. 2013

熱光起電力発電への適用を目指したMg2Siの製膜
19 Sep. 2013

各種イオンを用いたイオンビーム照射による炭化層の形成が金属薄膜の密着性におよぼす影響
早川和希,矢ケ崎隆義,桑折 仁,鷹野一朗
Mechanical Engineering Congress,2013 JAPAN (MECJ-13), 11 Sep. 2013

炭化工程を導入したRDF作製プロセスの熱的評価
佐藤友昭,矢ケ崎隆義,桑折 仁
Mechanical Engineering Congress,2013 JAPAN (MECJ-13), 11 Sep. 2013

生分解性プラスチックの微細構造の変化が強度及び分解に与える影響
高田真伍,矢ケ崎隆義,桑折 仁,西谷要介,馬場則男,馬場美鈴
Mechanical Engineering Congress,2013 JAPAN (MECJ-13), 11 Sep. 2013

Bi層状酸化物の合成および熱電特性
09 Sep. 2013

タングステンシリサイドの熱電特性におよぼす元素置換の影響
09 Sep. 2013

Effects of Element Substitution on Thermoelectric Properties of Tungsten Silicide.
Takuma KURISHIMA1; Hitoshi KOHRI; Masahiko KATO and Takayoshi YAGASAKI
32nd International Conference on Thermoelectrics (ICT2013), 02 Jul. 2013

アーク溶融法により作製したWSi2の熱電特性
08 Jun. 2013

熱光起電力発電への適用を目指したMg2Siの製膜方法に関する研究
08 Jun. 2013

一般可燃性廃棄物を減量とする炭化RDFの創製と評価
08 Jun. 2013

生分解性樹脂のイオンビームを用いた薄膜付与および薄膜付与材の分解挙動に関する研究
08 Jun. 2013

生分解性樹脂の微細組織の改質が強度及び分解に与える影響
08 Jun. 2013

斜め衝突を利用した衛星用軽量デブリシールドの開発に関する基礎研究
08 Jun. 2013

微細構造を制御した生分解性プラスチックの機械的特性及び加水分解特性の変化
18 May 2013

廃棄プラスチックを添加した炭化RDFの燃焼特性
18 May 2013

生分解性プラスチックのイオンビームを用いた薄膜付与及び分解挙動に関する研究
18 May 2013

斜め衝突を利用した衛星用デブリシールドの開発
26 Feb. 2013

Novel Debris Protector for SSPS by Oblique Collision
Ichiro Shiota; Masahiko Kato; Hitoshi Kohri; Takayoshi Yagasaki; Koji Tanaka; Susumu Sasaki; Atsushi Yumoto
2nd Annual International Conference on Sustainable Energy and Environmental Sciences(SEES2013), 25 Feb. 2013

斜め衝突を応用した宇宙機用軽量デブリシールドに関する研究
木下 尋可; 桑折 仁; 田中 孝治; 塩田 一路; 何 建梅; 佐々木 進; 矢ケ﨑 隆義
第13回 宇宙科学シンポジウム, 09 Jan. 2013

Novel Debris Protector for SSPS by Oblique Collision
2013

Effects of Element Substitution on Thermoelectric Properties of Tungsten Silicide.
2013

斜め衝突を利用した軽量デブリシールドの研究
13 Dec. 2012

二ケイ化タングステンの合成と熱電特性
13 Dec. 2012

サファイア基板上へのIn-Seの合成
13 Dec. 2012

生分解性樹脂へのイオンビーム照射による炭化層形成が金属薄膜の接着強度に及ぼす影響
13 Dec. 2012

生分解性プラスチックの微細構造制御が強度及び加水分解に及ぼす影響
13 Dec. 2012

表面改質を施した生分解性樹脂表面への金属薄膜の付与とその評価
13 Dec. 2012

微細気泡を用いた懸濁金属微粒子浮上分離に及ぼす微量界面活性剤の影響
07 Dec. 2012

Initial Crystal Growth Stage of In-Se by Vapor Transport Method
Naoki Takano; Takayoshi Yagasaki; Hitoshi Kohri
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Synthesis and Thermoelectric Properties of Tungsten Silicide
Takuma Kurishima; Takayoshi Yagasaki; Hitoshi Kohri
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Degradation Behavior of a Biodegradable Resin That Formed the Carbonization Layer on the Surface
Masafumi Iida; Kazuki Hayakawa; Ichiro Takano; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Improving the Physical Properties of Biodegradable Plastic
Shugo Ohgane; Shingo Takada; Norio Baba; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Hydrolytic Behavior and Microstructural Control of Biodegradable Plastic
Shingo Takada; Shugo Ohgane; Misuzu Baba; Norio Baba; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Influence of the Surface Property of a Biodegradable Plastic by Ion Beam Irradiation
Kazuki Hayakawa; Masafumi Iida; Ichiro Takano; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Fabrication and Characterization of Carbonized RDF Containing Plastic Waste
Tomoaki Sato; Yuki Ito; Hitoshi Kohri; Takayoshi Yagasaki
The 11th International Symposium on Advanced Technology (ISAT-Special), 30 Oct. 2012

Synthesis and Electrical Properties of Tungsten Silicide
Takuma KURISHIMA; Hitoshi KOHRI; Takayoshi YAGASAKI
IUMRS-ICEM2012, 26 Sep. 2012, IUMRS

Effect of Change in Fine Structure of The Biodegradable Plastic on through Forming Thin Film
Kazuki HAYAKAWA; Masafumi IIDA; Takayoshi YAGASAKI; Hitoshi KOHRI
IUMRS-ICEM2012, 26 Sep. 2012, IUMRS

タングステンシリサイドの合成
27 Aug. 2012

Thermoelectric Generating Properties of Aurivillius Compounds
Hitoshi KOHRI and Takayoshi YAGASAKI
CIMTEC2012, 12 Jun. 2012

The Synthesis of In-Se by Vapor Transport Method
Naoki Takano; Hitoshi Kohri and Takayoshi Yagasaki
CIMTEC2012, 12 Jun. 2012

デブリ防護における斜め衝突の優位性
27 Feb. 2012

The Crystal Growth of In-Se for Thermophotovoltaic Generator
Naoki Takano; Hitoshi Kohri; Takayoshi Yagasaki.
31st ISAS SPACE ENERGY SYMPOSIUM, 24 Feb. 2012

Thermoelectric Generating Properties of Aurivillius Compounds
2012

The Synthesis of In-Se by Vapor Transport Method
2012

Synthesis and Electrical Properties of Tungsten Silicide
2012

Effect of Change in Fine Structure of The Biodegradable Plastic on through Forming Thin Film
2012

Initial Crystal Growth Stage of In-Se by Vapor Transport Method
2012

Synthesis and Thermoelectric Properties of Tungsten Silicide
2012

Degradation Behavior of a Biodegradable Resin That Formed the Carbonization Layer on the Surface
2012

Improving the Physical Properties of Biodegradable Plastic
2012

Hydrolytic Behavior and Microstructural Control of Biodegradable Plastic
2012

Influence of the Surface Property of a Biodegradable Plastic by Ion Beam Irradiation
2012

Fabrication and Characterization of Carbonized RDF Containing Plastic Waste
2012

The Crystal Growth of In-Se for Thermophotovoltaic Generator
31st ISAS SPACE ENERGY SYMPOSIUM, 2012

The Crystal Growth of In-Se by Vapor Transport Method
Naoki TAKANO; Hitoshi KOHRI; Takayoshi YAGASAKI
21st Academic Symposium of MRS-Japan 2011, 20 Dec. 2011, The Materials Research Society of Japan

Element Substituted Effects on Thermoelectric Properties for Aurivillius Phase Bi-V-O
Emi YAMAMORI; Hitoshi KOHRI; Takayoshi YAGASAKI
21st Academic Symposium of MRS-Japan 2011, 20 Dec. 2011, The Materials Research Society of Japan

ガラス被覆溶融紡糸法によるBiナノワイヤーの作製
09 Aug. 2011

Aurivillius化合物の合成および熱電特性の評価
08 Aug. 2011

Synthesis of In-Se by Gas Transport Method
Naoki TAKANO; Hitoshi KOHRI; Takayoshi YAGASAKI
2011 Annual Meeting of the Materials Science Society of Japan, 03 Jun. 2011

ポリイミド/炭素繊維複合材料からなる新規超軽量アブレータの開発
25 May 2011

Biナノワイヤーの作製および熱電特性
18 Mar. 2011

固体潤滑剤を分散した耐摩耗コーティングの作製
18 Mar. 2011

亜臨界水を用いたSMC材料の終末処理に関する研究
18 Mar. 2011

廃棄リグニンを添加したコジェネレーションシステム用RDFの試作及びその炭化処理に関わる研究
18 Mar. 2011

Aurivillius相Bi-V-Oの熱電特性による元素置換効果
2011

Synthesis of In-Se by Gas Transport Method
2011 Annual Meeting of the Materials Science Society of Japan, 2011

The Crystal Growth of In-Se by Vapor Transport Method
21st Academic Symposium of MRS-Japan 2011, 2011

気相輸送法を用いた熱光起電力発電材料の合成
04 Dec. 2010

廃棄リグニンを添加したコジェネレーションシステム用RDFの試作及びその炭化処理に関わる研究
04 Dec. 2010

Basic Experiment on Debris Shield using Obliqur Impact
19 Nov. 2010

The Effect of Heat Treatment on the Compressive Mechanical Properties of Carbon/Phenolic Resin Ablator
T. Era; K. Goto; H. Hatta; H. Kohri and T. Yagasaki
The 7th Asian-Australasian Conference on Composite Materials, 17 Nov. 2010

微細構造制御生分解性樹脂へのイオンビームアシスト法を用いたアモルファス炭素薄膜付与による多機能化
06 Nov. 2010

Multi-Functionalization of Biodegradable Resin by Formation of Carbon Deposited Thin Film from Decomposited Various Hydrocarbon Gas with Ion Beam Assist Method
T. Kakuta; T. Yagasaki; I. Takano and H. Kohri
The 9th International Symposium on Advanced Technology, 05 Nov. 2010

炭素繊維/ポリイミドを用いた超軽量次世代アブレータの開発
13 Oct. 2010

結晶化度の異なる生分解性樹脂へのイオンアシスト法を用いたアモルファス炭素薄膜の付与による多機能化
31 Aug. 2010

廃棄リグニンを添加したRDFの試作及び炭化処理に関わる研究
31 Aug. 2010

Functionalization of Biodegradable Resin by Formation of Carbon Thin Film from Decomposited Various Hydrocarbon Gas with Ion Beam Assist Method
T. Kakuta; T. Yagasaki; I. Takano; H. Kohri and M. Kaneko
17th International Conference on Ion Beam Modification of Materials, 23 Aug. 2010

Thermoelectric Generating Properties of Perovskite Like Materials
H. KOHRI; M. KATO; I. J. OHSUGI and I. SHIOTA
The 5th FORUM ON NEW MATERIALS (CIMTEC 2010), 17 Jun. 2010

炭化型アブレータの圧縮変形挙動
11 Mar. 2010

アトマイズ処理粉末を出発原料とする多孔質焼結体の作製とその特性評価
05 Mar. 2010

Thermoelectric Generating Properties of Perovskite Like Materials
2010

Functionalization of Biodegradable Resin by Formation of Carbon Thin Film from Decomposited Various Hydrocarbon Gas with Ion Beam Assist Method
2010

Multi-Functionalization of Biodegradable Resin by Formation of Carbon Deposited Thin Film from Decomposited Various Hydrocarbon Gas with Ion Beam Assist Method
2010

The Effect of Heat Treatment on the Compressive Mechanical Properties of Carbon/Phenolic Resin Ablator
2010

斜め衝突を応用したデブリシールドの開発
2010

アトマイズ加工粉末を用いた多孔質チタン焼結体の作製とその評価
31 Oct. 2009

CFRP PANEL FOR PROTECTION FROM SPACE DEBRIS,BY OBLIQUE COLLISION
Ichiro Shiota; Hitoshi Kohri; Atsushi Yumoto; Masahiko Kato; Kohji Tanaka; Susumu Sasaki
ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials, 01 Oct. 2009

Coサイトを置換したCa3Co2O6の熱電特性
08 Sep. 2009

Ca3Co2O6の相変化と熱電能
11 Aug. 2009

CrSi2におけるTiおよびVの添加効果
10 Aug. 2009

Ca3Co2O6 for High Temperature Side of Thermoelectric FGM
Takeo Uesugi; Hitoshi Kohri; Ichiro Shiota; Masahiko Kato and Isao. J. Ohsugi
The 10th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials, 23 Sep. 2008

A Trial of FGM Bearings with Solid,Lubricant
Takashi Hashimoto; Hitoshi Kohri; Atsushi Yumoto; Ichiro Shiota
The 10th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials, 23 Sep. 2008

Effect of Aluminum and Copper Addition to the Thermoelectric Properties of sintered FeSi2 in Atmosphere
21 Aug. 2008

Heat Durability of Carbon fibre reinforced Nickel Composites
Ichiro Shiota; Hitoshi Kohri
DURACOSYS '08, 16 Jul. 2008

Thermoelectric Properties of High Density Sintered Ca3Co2O6
T. Uesugi; H. Kohri; I. Shiota; M. Kato and I. J. Ohsugi
The 3rd International Conference "Smart Materials, Structure and System" (CIMTEC 2008), 12 Jun. 2008

Fabrication of electrode for thermoelectric oxide materials
Hitoshi Kohri; Ichiro Shiota; Masahiko Kato and Isao J. Ohsugi
The 3rd International Conference "Smart Materials, Structure and System" (CIMTEC 2008), 11 Jun. 2008

Friction Coefficients and Wear Rates of MoS2/Cu, BN/Cu Composites
Takashi Hashimoto; Hitoshi Kohri; Atsushi Yumoto and Ichiro Shiota
The 3rd International Conference "Smart Materials, Structure and System" (CIMTEC 2008), 11 Jun. 2008

New Fabrication Process of Nano–composites by Biomimetic Approach
M. OKAMOTO; E. IWAI; H. HATTA; H. KOHRI; I. SHIOTA
The 3rd International Conference "Smart Materials, Structure and System" (CIMTEC 2008), 11 Jun. 2008

Fabrication of electrode for thermoelectric oxide materials
2008

Friction Coefficients and Wear Rates of MoS2/Cu, BN/Cu Composites
2008

New Fabrication Process of Nano–composites by Biomimetic Approach
2008

Thermoelectric Properties of High Density Sintered Ca3Co2O6
2008

Heat Durability of Carbon fibre reinforced Nickel Composites
2008

A Trial of FGM Bearings with Solid Lubricant
2008

Ca3Co2O6 for High Temperature Side of Thermoelectric FGM
2008

New Fabrication Process of Nano–composites by Biomimetic Approach
The 3rd International Conference "Smart Materials, Structure and System" (CIMTEC 2008), 2008

Effect of Aluminum and Copper Addition to the Thermoelectric Properties of sintered FeSi2 in Atmosphere
2008

A Trial of FGM Bearings with Solid Lubricant
The 10th International Symposium on Multiscale, Multifunctional & Functionally Graded Materials, 2008

Bi2Te3系FGM用高温側材料を目的としたBi2Te3-GeTe系に関する基礎的研究
13 Nov. 2007

CoSiの熱電特性に及ぼすNi，Cuの添加効果
13 Nov. 2007

ガラス被覆溶融紡糸法によるn型Bi2Te3系化合物の微細加工
29 Aug. 2007

CoSi焼結体におけるNiおよびCuの添加が熱電特性に及ぼす影響
29 Aug. 2007

Tribology of Babbitt Metal with Solid Lubricants
Ichiro Shiota; Atsushi Yumoto; Hitoshi Kohri; Naotake Niwa
AUSTRIB 2006, 04 Dec. 2006

Fe2Si5の分解反応におよぼすCuの効果
22 Aug. 2006

Synthesis and thermoelectric properties of Bi2Te3-GeTe pseudo binary system
Hitoshi Kohri; Ichiro Shiota; Masahiko Kato; Isao J. Ohsugi and Takashi Goto
CIMTEC2006 11th International Ceramics Congress, 06 Jun. 2006

W繊維/Ti-Al系複合材料の作製のためのSiC中間層
05 Jun. 2006

Synthesis and thermoelectric properties of Bi2Te3-GeTe pseudo binary system
2006

Tribology of Babbitt Metal with Solid Lubricants
2006

Bi2Te3－GeTe系の熱電特性
22 Aug. 2005

ガラス被覆溶融紡糸法によるBi2Te3系化合物の微細加工
22 Aug. 2005

Solid State Synthesis of Ti-Al Composites with Metal Fiber
I. Shiota; H. Kohri; M. Kato
8th International Symposium on Self-Propagating High-Temperature Synthesis (SHS 2005), 21 Jun. 2005

Solid State Synthesis of Ti-Al Composites with Metal Fiber
2005

熱電材料の微細加工に関する研究
19 Aug. 2004

Development of thermoelectric cooling devices with graded structure
H. Kohri; I. Shiota
Multifunctional and Functionally Graded Materials (FGM2004), 11 Jul. 2004

Development of thermoelectric cooling devices with graded structure
2004

W-Fiber Reinforced Ti-Al Composites Produced by Foil Metallurgy
H. Kohri; M. Kato*; I. Shiota
The Third International Conference on Light Materials for Transportation Systems, 02 Nov. 2003

Interfacial Reaction in SiCpc Fiber Reinforced Nickel Composite
T. Kuwahara; H. Kohri; M. Kato*; T. Yagasaki; Y. Kimura; T. Kimura**; I. Shiota
The Third International Conference on Light Materials for Transportation Systems, 02 Nov. 2003

Properties of SiC/SiC Composites with Surface Modified SiC Fiber
H. Kohri; I. Shiota; T. Yagasaki; Y. Kimura; T. Watanabe; M. Kato*
The 8th International Union of Materials Reserch Societies International Conference on Advanced Materials : Symposium C-1Ecomaterials, 08 Oct. 2003

Fabrication and Properties of SiCpc Fiber Reinforced Nickel
T. Kuwahara; H. Kohri; T. Yagasaki; Y. Kimura; I. Shiota; M. Kato*
The 8th International Union of Materials Reserch Societies International Conference on Advanced Materials : Symposium C-1Ecomaterials, 08 Oct. 2003

Thermoelectric Properties of MnSi~1.73 Produced by Cold Pressing and Sintering
T. Iizuka*; M. Kato*; I. J. Ohsugi*; T. Kojima*; I. A. Nishida; H. Kohri; I. Shiota; T. Suzuki
The 8th International Union of Materials Reserch Societies International Conference on Advanced Materials : Symposium C-6 Advanced Thermoelectric Materials for Environment-Friendly Energy Systems, 08 Oct. 2003

Cu-Doping Effect and Oxidation Resistance of FeSi2 Thermoelectric Material
A. Matsunawa*; M. Kato*; I. J. Ohsugi*; T. Kojima*; I. A. Nishida; H. Kohri; I. Shiota; T. Suzuki
The 8th International Union of Materials Reserch Societies International Conference on Advanced Materials : Symposium C-7 Semiconductiong Silicides: Science and Future Technology, 08 Oct. 2003

二ケイ化鉄のα→β変態における銅添加効果
04 Aug. 2003

ファインセラミックス技術によるCrSi2-CoSi接合素子の作製
04 Aug. 2003

Solid State Synthesis of Ti-Al Composites by Foil Metallurgy
I. Shiota; H. Kohri; M. Kato*
7th International Symposium on Self-Propagating High-Temperature Synthesis (SHS Krakow 2003), Jul. 2003

Solid State Synthesis of Ti-Al Composites by Foil Metallurgy
2003

Properties of SiC/SiC Composites with Surface Modified SiC Fiber
2003

Fabrication and Properties of SiCpc Fiber Reinforced Nickel
2003

Thermoelectric Properties of MnSi~1.73 Produced by Cold Pressing and Sintering
2003

Cu-Doping Effect and Oxidation Resistance of FeSi2 Thermoelectric Material
2003

W-Fiber Reinforced Ti-Al Composites Produced by Foil Metallurgy
2003

Interfacial Reaction in SiCpc Fiber Reinforced Nickel Composite
2003

FGM化によるBi-Te系化合物の冷却特性の向上
19 Nov. 2002

GeによるPb-Te系化合物の使用温度領域制御
19 Nov. 2002

Surface Modification of SiC Fiber for Improvement of SiC/SiC Composite
T. Watanabe; H. Kohri; T. Yagasaki; Y. Kimura; I. Shiota
International Symposium on Advanced Technology(ISAT-1st:Nanotechnology and its Related Science), 05 Nov. 2002

Effect of FGMs on Thermoelectric Cooling Properties of Bismuth Telluride
A. Iwama; H. Kohri; I. Shiota
7th International Symposium on Functionally Graded Materials(FGM2002), 15 Oct. 2002

Improvement of Thermoelectric Properties for n-type PbTe by Adding Ge
H. Kohri; I. A. Nishida*; I. Shiota
7th International Symposium on Functionally Graded Materials(FGM2002), 15 Oct. 2002

Formation on Ti-Al Intermetallic Compounds at Low Temperature by Foil Metallurgy
H. Tetsuka; M. Kato*; H. Kohri; I. Shiota
CIMTEC2002-3rd Forum on New Materials 2nd International Conference "Mass and Charge Transport in Inorganic Materials", 14 Jul. 2002

Ge Effect on Thermoelectric Properties for Pb-Te
H. Kohri; K. Tanaka; I. Shiota
CIMTEC2002-3rd Forum on New Materials 2nd International Conference "Mass and Charge Transport in Inorganic Materials", 14 Jul. 2002

Surface Modification of SiC by Hydro-thermal Treatment
T. Watanabe; H. Kohri; T. Yagasaki; Y. Kimura; I. Shiota
CIMTEC2002-10th International Ceramics Congress-Part C, 14 Jul. 2002

Formation on Ti-Al Intermetallic Compounds at Low Temperature by Foil Metallurgy
2002

Ge Effect on Thermoelectric Properties for Pb-Te
2002

Surface Modification of SiC by Hydro-thermal Treatment
2002

Effect of FGMs on Thermoelectric Cooling Properties of Bismuth Telluride
2002

Improvement of Thermoelectric Properties for n-type PbTe by Adding Ge
2002

Surface Modification of SiC Fiber for Improvement of SiC/SiC Composite
2002

Control of Grain Size and Crystal Orientation for Bi-Sb-Te Compounds
H. Kohri; Xavier Dauphin*; Kazuhiro Hasezaki**; I. A. Nishida***; I. Shiota
20th International Conference on Thermoelectrics, ICT2001, 08 Jun. 2001

Thermal Stability of Thermoelectric Properties for nondoped PbTe
K. Tanaka; H. Kohri; I. Shiota; I. A. Nishida*
20th International Conference on Thermoelectrics, ICT2001, 08 Jun. 2001

Control of Grain Size and Crystal Orientation for Bi-Sb-Te Compounds
2001

Thermal Stability of Thermoelectric Properties for nondoped PbTe
2001

一定キャリア濃度におけるBi-Te-Se系化合物のSe組成FGM化
05 Dec. 2000

Ni-Al系合金表面へのFGM-Al拡散被覆
05 Dec. 2000

FGM被覆のためのTi-Al系金属間化合物の組成制御
05 Dec. 2000

Bi-Te-Se系化合物の熱電特性におよぼす組成比およびキャリア濃度の影響
01 Oct. 2000

Preparation of P-Type Segmented Thermoelectric Materials
H. Kohri; M. Kato*; I. Shiota; I. A. Nishida*; T. Suzuki*
19th International Conference on Thermoelectrics, ICT2000, 20 Aug. 2000

Properties of Joints of Electrodes
I. Shiota; H. Kohri; M. Kato*; I. A. Nishida*; T. Suzuki*
19th International Conference on Thermoelectrics, ICT2000, 20 Aug. 2000

Ni被覆ピッチ系炭素繊維の熱的安定性
29 May 2000

箔冶金法によるTi－Al系金属間化合物の組織
29 May 2000

Joining characteristics of p-type segmented thermoelectric materials
H. Kohri; M. Kato*; I. Shota; T. Suzuki*
INTERNATIONAL CONEFRENCE MASS AND CHARGE TRANSPORT IN INORGANIC MATERIALS: Fundamentals to Devices(CIMTEC), 28 May 2000

Formation of Ti-Al Intermetallic compounds by foil metallurgy
M. Kato*; H. Kohri; I. Shiota; T. Suzuki*; T. Kimura**; C. Masuda**
INTERNATIONAL CONEFRENCE MASS AND CHARGE TRANSPORT IN INORGANIC MATERIALS: Fundamentals to Devices(CIMTEC), 28 May 2000

Interfacial phenomena between Ni and pitch based carbon fibre
I. Shiota; M. Kato*; H. Kohri
INTERNATIONAL CONEFRENCE MASS AND CHARGE TRANSPORT IN INORGANIC MATERIALS: Fundamentals to Devices(CIMTEC), 28 May 2000

Joining characteristics of p-type segmented thermoelectric materials
2000

Formation of Ti-Al Intermetallic compounds by foil metallurgy
2000

Interfacial phenomena between Ni and pitch based carbon fibre
2000

Preparation of P-Type Segmented Thermoelectric Materials
2000

Properties of Joints of Electrodes
2000

Preparation and Structure of Ceramic Particle Dispersed Ni by Electro-deposition
18 Nov. 1999

Preparation and thermoelectric properties of Bi-Sb-Te compound
25 Mar. 1999

Preparation and thermoelectric properties of Bi-Sb-Te compound
1999

Preparation and Structure of Ceramic Particle Dispersed Ni by Electro-deposition
1999

Te過剰Sb2Te3の微細組織と熱電特性
Mar. 1998

Teを過剰添加したSb-Te化合物の合成および熱電特性
Jan. 1998

Sb-Teの熱電特性におよぼすTe添加量の影響
Oct. 1997

Teを過剰添加したSb2Te3の熱電特性
Mar. 1997

Bi2Te3系熱電材料の高効率化に関する研究の近況
Sep. 1996

Influence of Dopants on Thermoelectric Properties of Unidirectionally Solidified n-Bi2Te3
Sep. 1996

傾斜構造を有するn型Bi2Te3系焼結体に関する基礎的研究
Mar. 1996

Influence of Dopants on Thermoelectric Properties of Unidirectionally Solidified n-Bi2Te3
1996

Thermoelectric Properties of Functionally Graded Sintered Bi2Te3
' H. Kohri; K. Sato; T. Matsuzaka; T. Suzuki; I. Shiota; I. A. Nishida'
' the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS', Dec. 1995

The effct of the grain size of Bi2Te3 and PbTe on the thermal conductivity
T. Matsuzaka; K. Sato; H. Kohri; I. Shiota; Y. Imai and I. A. Nishida'
' the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS', Dec. 1995

Synthesis and Thermoelectric Properties of PbTe Solid Solutions
K. Sato; H. Kohri; T. Matsuzaka; I. Shiota; Y. Imai and I. A. Nishida
' the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS', Dec. 1995

傾斜構造を有するBi2Te3系焼結体の熱電特性
Oct. 1995

Bi2Te3系焼結体の熱電特性
Aug. 1995

PbTeの合成と熱電諸特性
Aug. 1995

Thermoelectric Properties of Functionally Graded Sintered Bi2Te3
1995

The effct of the grain size of Bi2Te3 and PbTe on the thermal conductivity
1995

Synthesis and Thermoelectric Properties of PbTe Solid Solutions
1995

Oct. 1996
Japan

Dec. 1995
The Japan Institute of Metals Excellent Poster Award At the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS, Cosponsored by ASM, KIM, ISIJ and MMIJ.

1995
Japan

1995
The Japan Institute of Metals Excellent Poster Award At the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS, Cosponsored by ASM・・・
The Japan Institute of Metals Excellent Poster Award At the 117th Meeting of the Japan Institute of Metals held in Hawaii, as International Symposia, on Advansed Materials and Technology for the 21st Century in Cooperation with TMS, Cosponsored by ASM, KIM, ISIJ and MMIJ.

01 Apr. 2018 - 31 Mar. 2022
Power Generating Properties of Thermoelectric Conversion Module using Nano-stacked Ion Conductor
Grant-in-Aid for Scientific Research (C), Kogakuin University

2011 - 2013
Effect of Changes in Fine Structure of the Biodegradable Plastics on through Forming Thin Film by Ion Beam Irradiation
Grant-in-Aid for Scientific Research (C), Kogakuin University

一般社団法人パロマ環境技術開発財団
19 May 2023
2,000,000円

一般社団法人パロマ環境技術開発財団
3,000,000円

一般財団法人新技術振興渡辺記念会
1,050,000円